|
|
| |||||||||
 | ||||||||||
|
Socket Tool |
Specs Tools for 4-stroke Dirt bikes, and ATV | |||||||||
| Unit | Price | Part Name | Ship Cost | Total | Shopping Cart | | |||||
| | |
1 |
$19 | Socket Tool set (8mm, 10mm, 12mm, 14mm) 11 3/4 inch long tool |
$10.50 USA |
$28 |
GY6 50cc-250cc Clutch Tool:
| ||||
|
1 |
$6 | 4-stroke Spark Plug socket |
$3 |
$9 | ||||||
| 1 | $14 | Stator Socket 33mm Inside | $5 | $19 | ||||||
|
1 |
$12 |
 Stator Socket 27mm inside, 27mm outside tread with screw |
$5 |
$19 | ||||||
|
1 |
$6 | Stator Socket 27mm inside, 27mm outside tread with out screw |
$5 |
$11 | ||||||
|
1 |
$14 | Stator Socket 24mm outside, 27mm outside tread |
$5 |
$19 | ||||||
|
1 |
$16 |
 GY6 Crank Tool (Inside Diameter:32mm, Outside Doameter:39mm) |
$5 |
$21 | ||||||
| 1 | $24 |
 GY6 50cc-250cc Clutch Tool(39mm/41mm) |
$5 | $29 | ||||||
| 1 | $29 |
Universal Flywheel Puller (for Moped, ATV, & Dirt bikes) |
$5 | $34 | ||||||
| 1 | $40 |
 Bearing Puller kit (Can remove bad and good bearings, small size to large size bearings) |
$10 | $50 | ||||||
| 1 | $20 |
 3 Jaw Pilot Bearing Puller (pulls bearings from 1/2" to 1-1/12" diameter) |
$5 | $25 | ||||||
| 1 | $7.50 |
 CG 125-250cc Stator Bolt Tool (16mm Thread) |
$2 | $9.50 | ||||||
| 1 | $10 |
 50-125cc Clutch Tool (for Horizontal motor, Click picture for measurements) |
$5 | $15 | ||||||
| 1 | $20 |
 50-125cc Stator Tool (2 Pieces-Universal Holder and Stator Remover) Click picture for thread measurement |
$8 | $28 | ||||||
| 1 | $30 |
 50-125cc Clutch/Stator Tool (3 pieces-Universal Holder, Stator Remover, and Clutch Tool) Click for thread measurement |
$8 | $38 | ||||||
c scooters, 
