Dealers Wanted
   Znen  Lance Venice 150 Moped (ZN150T-20)       Znen 150cc Moped, Model  ZN150T-20  

Lance Venice 150T-20 Axle (9 1/8 inch Long, 12mm Diameter) $6, Front Axle  Spacer (1 3/4 inch Long) $2

Lance Venice 150T-20 Muffler Assembly $120

 Lance Venice 150 Front Fork Set (18 1/2 inch Long) $79
 
 Lance Venice 150T-20 Rear Drum Rim (2.5-12)  $85
 
 Lance Venice 150 Front Disc Rim (2.5-12)  $85
  150cc  Version #A) $55

Lance Venice 150T-20 Odometer Gauge 8-pin 50cc Version $55
Znen 150T-20 Front Upper Left or Right Signal (Clear)$16 each 
 Lance Venice 150T-20 Front Brake assembly (1-chamber ver.) $95

Lance Venice 150 Lock Set $48

Znen 150cc Lance Venice 150T-20 Main Wire Harness $45

Lance Venice 150T-20 Rear Shock Set (11 3/4 inch, eye to eye 9 13/16 Inch) $80


Znen 150T-20 150 Left Switch w/brake lever (2-Pin Plug, 2-Pin Plug, 6-Pin Plug)
    $30

Lance Venice 150 Right Switch (3-Pin Plug) $20

 Lance Venice 150T-20 Front Brake assembly  (2-chamber ver.) $95

GY6 125cc to 150cc Starter  $5
 
Lance Venice 150T-20 Odometer Cable (39 1/2 inch) $16

Lance Venice 150T-20 throttle (Gas) Cable (77inch) $15

Znen 150T-20 Left or Right Rear Turn Signal (Orange) $16 each or $32 Pair

Znen 150T-20 FrontLower  Left or Right Signal (with Orange bulb) $16 each or $32 Pair

 

  

     
   
Maximum Speed   90Km/h  (55+ MPH)       Fuel Capacity  1.45 gallon      Brake Type  Front Disc, Rear Drum   Engine Type  4-stroke, Single, air cooled 150cc motor.       Tire size  100/80 - 16,  120/80 - 16    Battery  n/a       Starting System  Electric/Kicks          Twin shock
AKA: Venice 150, Romans 150/50, Lance 150

      

Lance Venice 150T-20 Seat Assembly $69

Znen 150T-20 Rear Brake Light $40


Jonway 150T-2 AirBox Assembly $48      

Znen 150T-20 Head Light (also fit znen 150T-F) $40

   

Znen 150T-20 Front Brake Hose $10

Znen 150T-20 Rear Brake Hose $20

Znen 150T-20 Rear Orange Signal Light $16 each, $32 a set

znen 150t-20 gas capZnen 150-20 Gas cap & keys  $12

Znen 150T-20 Rear Upper Left or Right Signal (Clear)$16 each or $32 Pair


Lance Venice 150 Left Grip $8, Right Speed Controller $10, Set $16

|| Show All Gas Scooter Parts  Page 2 | Show All Electric Scooter Parts Page 2 | Find Gas Scooter Parts by Scooter Style|   Find Electric Scooter Parts by Scooter Style|

    order@ScooterParts4Less.com|  | Order Info | Technical Tips |

Znen 125cc/150cc Head Cover (fits only the Znen brand of Mopeds) $36

Znen 150cc Head (fits only the Znen brand of Mopeds) $58

Znen 150cc CVT Cover Gasket (Short Version) (fits only the Znen brand of Mopeds) $7

Znen 150cc CVT Cover Gasket (Long Version) (fits only the Znen brand of Mopeds) $7

Znen 150cc Cylinder Kit (fits only the Znen brand of Mopeds) $79

 

 

Znen 150cc CVT Black Cover (Long Version) (fits only the Znen brand of Mopeds)$60

Znen 150cc CVT Silver Cover (Long Version) (fits only the Znen brand of Mopeds) $60

Znen 150cc Ignition Coil (fits only the Znen brand of Mopeds)$24

Znen 150cc Ignition Coil (1-prong version) for Znen Brand Motor $24

Znen 150cc Camshaft (fits only the Znen brand of Mopeds) $24

 

Znen 150cc Timing Chain Guide set (fits only the Znen brand of Mopeds) $12

Znen 150cc Chain Tensioner (fits only the Znen brand of Mopeds) $16


 Znen GY6 150cc Scooter 12-coil Stator (29mm center hole diameter, 42mm diagonal bolt hole spacing) (fits only the Znen brand of Mopeds) $38

Znen 150cc 12-Coil Magneto Housing (fits only the Znen brand of Mopeds) $36

Znen 150cc Rocker Arm Holder (fits only the Znen brand of Mopeds) $24

Znen 150cc Timing Chain (11 inch, 90 Link) (fits only the Znen brand of Mopeds)$12

Znen 150cc Variator (Pulley) (fits only the Znen brand of Mopeds) $40

 

GY6 Moped 125cc-150cc Performance Muffler (Stainless Steel)  $179 Fits all 125cc/150cc that use dual shock in the rear 

GY6 125cc/150cc Rear Drive Shaft (Version 2) (186mm) $28

GY6 125cc/150cc Rear Drive Shaft (Version 1) (173mm) $28

Znen 150T-20 Kick Stand $16

Break Hose Screw 10mmx29mm $2

GY6 150cc Starter Clutch Assembly (50Tooth) $36


GY6 125/150cc Turbo Fan $29 

GY6 125cc/150cc Red Cooling Fan $20

GY6 120cc/150cc Kick Starter Idle Gear $20

GY6 125/150cc Counter Shaft Gear $40


Moped Stock Fuel Filter $2.50 

 GY6 125cc/150cc Vacuum Fuel Pump (stock)  $30

 GY6 Fuel  Valve $12  

KOSO HP  28mm Carburetor kit (for GY6 Mopeds) $130

4-stroke Carburetor Bowl Gasket $2.70 each 

Znen Fork Neck/Bearings (Set of 7 - 50mm, 44mm, 43mm, 43mm, 40mm, 36mm, 31mm) $16


GY6 50cc to 150cc 30.50mm Exhaust Gasket  $2

 GY6 125/150cc Manifold  (30mm diameter rubber part, 22mm diameter metal intake) (1 outlet) $15

 GY6 125/150cc Manifold  (30mm diameter rubber part, 22mm diameter metal intake)  (2 outlet) $15

GY6 125cc/150cc manifold (rubber part 30mm diameter, metal intake 22mm diameter) (2 outlet, Extended Version) $20


 GY6 cvt belt (835-20-30) $26

GY6 Moped 150cc Discharge Resistance $20


 4-Stroke Performance Fuel Line (Yellow or Green) $8

GY6 HP Manifold (Aluminum intake 27mm/ Rubber intake 32mm ) $36

GY6 125cc to 150cc Carburetor: 24mm outside, 32mm outside, 38mm air filter Intake  $59

 Electric Choke for GY6 125cc/150cc Carburetors $1
0

 GY6 Kick Starter (Round Pedal Version) $14

 GY6 125cc/150cc HP Clutch Drum (Bell) $49

 GY6 150cc Gasket set $20

Znen 150cc Crankshaft (fits only the Znen brand of Mopeds) $69

GY6 150cc Cylinder Gasket $8


CVK GY6 125cc-150cc Performance Jet Set  ver #2  (main jet #115, Idle Jet#38.   $9.50


CVK GY6 125cc-150cc Performance Jet Set  ver #3  (main jet #122, Idle Jet#42) recommended for big bore kits  $9.50

 GY6 150cc Fan Cover $6
           

ABS Upgrade (10mm tread) $16 
slider roller weight set
 GY6 150cc Slider Weight set (11 gram) $
20
slider roller weight set
 GY6 150cc Slider Weight set (12 gram) $20  

 GY6 Solenoid  $14   
slider roller weight set
 GY6 150cc Slider Weight set (13 gram) $
20
 

 


 GY6 150cc Valve set $18

 Iridium Performance Spark Plug (CR8HIX) $17

NGK Racking Cable (CR2) $29   

GY6 125cc/150cc motor Stock Ignition Coil  $25  

GY6 Billet Dip Stick (7.8cm) $20 


 GY6 Stock Spark Plug (50cc to 150cc) $2.50

orange HP Ignition Coil for GY6 motors  50cc to 150cc motor $29  

GY6 125cc/150cc Final Drive Shaft (version 1, 19 Splines, 194mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23

GY6 125cc/150cc Final Drive Shaft (version 2, 19 Splines, 196mm length, Diameter at Bearing End: 26mm, Diameter at Smooth End: 16mm) $23

 GY6 Fuel  Valve $16     

 GY6 125cc/150cc Isolater (23mm center hole, 45mm bolt hole spacing)  $4
brake switch wire
Brake Switch Wire $35

 GY6  Belt (842-20-30) Gates Powerlink  $35  

GY6 150cc Performance Roller Weight set (9g, 10g or 11g set) $20 per set

GY6 150cc Oil Pump $20

GY6 50cc-150cc Muffler Screw Set (6mm) $6

Znen GY6 150cc CDI $23


 GY6 125cc/150cc CamShaft (34 tooth) $28

GY6 150cc Piston Rebuilt Kit  $35
           

 GY6 150cc Piston Rings set (57mm) $12

 GY6 150cc Timing Chain 90 Links (11 inch long) $12

 GY6  50cc to 150cc Dipstick (8.2cm long) $

GY6 125cc/150cc Valve Assembly $26

GY6 150cc Piston Rebuilt Kit (57mm diameter, 15mm wrist pin)  $37  
 
 GY6 125cc/150cc HP  CamShaft $59
GY6 150cc Clutch Shoe Set
 GY6 150cc Clutch Shoe Set $25  

 GY6 58.5mm Alloy Big Bore  Kit $250

  GY6 125cc/150cc Stock Variator (Pulley) $45

 GY6 125cc/150cc Clutch Assembly $65

 GY6 125cc/150cc Clutch Drum (Bell) $20

 GY6 125cc/150cc Racing Clutch   $75

 GY6 2mm Stroker Crank (125cc/150cc)  $188

 GY6 125cc/150cc CrankShaft (287mm Total Length) $79

 GY6 125cc/150cc Timing Chain Guide set $10

  GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 1, 130mm total length $20

 GY6 125cc/ 150cc Kick Start Gear Shaft (spindle) Version 2, 170mm total length $20

GY6 125cc/150cc Crank Bearing $11 

 GY6 150cc  57mm Cylinder  Kit $76

 GY6 125cc/150cc HP Clutch Spring set (1000 RPM) $10

 GY6 125cc/150cc HP Clutch Spring set (1500 RPM) $10

 GY6 125cc/150cc HP Clutch Spring set (2000 RPM) $10
slider roller weight set
 GY6 150cc Slider Weight set (14 gram) $
20

GY6 125cc-150cc Final Drive Gear (51Tooth/19Tooth) $20

 


GY6 Mini 3-Way Remote Fuel Valve $13

4-Stroke 42mm Shielded Air Filter (fit's GY6 125cc/150cc motors) $20

 GY6 125cc/150cc Koso HP Pulley $50

Repair Kit for GY6 125/150cc Carburetor $1
0
 

GY6 150cc Oil Pump Chain $10

 

 

 

Moped Throttle housing (cable bracket style) $8 

Znen 150cc Rectifier $22 

 

 


 GY6 Kick Starter (Flat Pedal Version) $16 

GY6 125cc-150cc Performance Jet Set $8


 GY6  125cc/150cc Variator  V-Slide  set   $3.80

Cheng Shin CST  3.50-10 Dot Moped Tire    $46

GY6 50cc-250cc Clutch Tool(39mm/41mm) $24


GY6 Clutch Tool (Inside Diameter:32mm, OutSide  Diameter:39mm) $16
 

GY6 39mm Crank Tool $16

 

 
 Kenda 3.5-10 Dot Moped Tire   $46

Battery Strap (5 Inch Long)  $2.50

flywheel puller

Universal Flywheel Puller (for Moped, ATV, & Dirt bikes) $29


 Tire Popper Tool  $38

TreadLocker (Med Strength, 50 Gram)

Wire Tie (30 set) $2, 300 set $14 
 
  4-Stroke Fuel Line  $2.50 per Foot
       

GY6 150cc Valve Cover Gasket $3

 

 
  Moped Orange Round Reflector $4

Moped Kill Switch (4 Wire Plug) $5

Moped Horn Switch (2 Wire Plug) $5

Moped Passing Switch (4 Wire Plug) $5

Moped Turn Signal Switch (6 Wire Plug) $5

Moped Light Switch (6 Wire Plug) $5

Moped Starter Switch (2 Wire Plug) $5

Moped High/Low beam switch 3- Wire Plug) $5


  Moped Red Rectangle Reflector $4

Moped Chrome Mirror Set (10mm) $40

Moped Blank Key set ( Ver. #1)  $5
 
Moped Blank Key set ( Ver. #2)  $5
 
Moped Blank Key set ( Ver. #3)  $5
 
Moped Blank Key set ( Ver. #4)  $5

Moped Blank Key set: foldable ( Ver. #5)  $5

Moped Chrome Round Mirror Set (8mm) $28

Moped Chrome Mirror Set (8mm) $40 
    bearing pull tool kit
Bearing Puller kit $40
   

 

  border=0>